Plastic mold manufacturing is a very complex process. From the initial design, processing, assembly, debugging and other steps to the final real use, the impact of each process on the quality of plastic molds must be considered in the entire life cycle. Every detail must be in place, so as to improve the quality of the final plastic mold.

1. Select the casting material, the quality of the material directly affects the quality of the plastic mold, it is very important to choose the material with good performance and good heat resistance, so that the product produced is the best.

2. The design of plastic molds should be scientific and reasonable. For technical researchers, if they want to design products that meet the current market demand, they must be designed reasonably and use standard mold structures to complete the quality of mold parts. Standard execution of usability and technical machinability of mold structure.

3. Perfect quenching process. For plastic molds, the quenching process is indispensable. The steps of quenching should be operated correctly. If one step is wrongly operated, it will cause quality problems in the produced molds, resulting in the failure of plastic molds. use or shorten the service life.

4. Mold assembly: Plastic mold assembly is just like assembling a machine. Every part and every screw can't be wrong, otherwise the consequences will be quite serious, ranging from product defects and affecting production, and completely damaging the mold and causing scrap. Therefore, the assembly work must be very meticulous. During the assembly process, special attention should be paid to the cleaning of the mold, especially the waterway and screw holes, and the iron filings inside must be blown clean.

5. Mold maintenance: mold maintenance is mainly maintenance and maintenance in the production process. Every time the mold is used, a comprehensive maintenance should be carried out, especially the anti-rust of the molding part and the anti-rust of the main moving parts. Because the mold needs to receive water during the production process, it may fall on the mold during the installation or disassembly process, so it is necessary to ensure that the mold is dry, and then apply a layer of oil to protect it.